Terk FDTV1A Flat Digital Omni Directional Amplified Indoor Antenna (Black) Review
This is a great little antenna.
I have a great picture, many * free (cable) channels, and some breathing space
the constant search of the dipole / loop handling.
Before buying this antenna I tried two other aspects: the RCA ANT1251 (Digital Amplified Indoor Antenna)
and RCA ANT121 (Loop basic and extendable dipole) internal antenna.
The problem with each loop / dipole antenna is clear: if the antenna is (somehow)technologically superior,
Many times, the hours are spent re-adjusting and re-re-regulation, the dipoles Dang, adjusting the loop, and the repositioning of the antenna. And – if loops dipole antenna includes additional "switch" and / or "tuning knobs" (like the RCA ANT121 above), the number of possible positions for aligning the antenna for a successful reception is not optimal limits … and challenging.
I only had the Terk for 3 daysnow, but sweet Jesus … the damn thing actually works, and this is the only reason
I spend precious moments of my life writing this stupid letter. (Yes – I just wanted to give something in return.)
I have this product '4 'star (instead of '5'), because … No product is perfect and that includes the Terk.
small problems:
– When I installed and powered Terk everything I … absolutely nothing.
There were broken horrible, pixelatedPictures, and yes ~ anxiety. Then I added, the signal repeater / amplifier, and voila! I have strong signals, pictures excellent, and very little in terms of the need to reposition the device.
But – to my apartment layout of the city, away from the city stations, etc., etc.,
My unit Terk without the booster adjacent / amplifier to work. (As for the energy conscious among us, could be a problem.)
– Booster / Amplifier Design: The design ofBooster / amplifier unit is a bit 'uncomfortable.
If your amplifier / repeater antenna is connected, there is no on / off, you must connect or disconnect the amplifier to the antenna and the connector / plug from the power amplifier. ~ Essentially, once the amplifier / repeater connected
The antenna will not work without them (and the amplifier must be connected for use).
It 's just a little' uncomfortable, but the excellent performance of the antenna is worthInconvenience.
– Booster / Amplifier Design: also … for my particular layout presents the design of the booster / amplifier is another challenge. The same warning is a small black box connected by wire, both the antenna and my digital converter box. The connection cable (for the booster / amplifier) is a short * / Stubby enough, and the little box call * only * hard enough, it takes for my antenna and / or threatening to drive the rear of the TV . This isno big deal, and a repositioning little help, but until now, the set-up is a bit 'bulky. (I have a thick, analog TV table, my props electronics sit on top of the TV, for convenience). Ideally, the best and want both the main antenna, however, and poor access booster-box neighbors, on any flat surface.
(Note: The antenna cable first you have plenty of space to move the unit around, but no more than 2-3 m.
ofYour TV. when the amplifier / repeater is connected, an additional 1 to 1.5 m cable is applied loosely,
the device moves.)
– I can at any local train station / channel of my parish has offered … with one exception. This is interesting because the positioning of the device in almost any position will result in each channel (in my area), some clear … With the exception of a small canal that refuses to be seen.
In essence …
This device is easyto install, easy to install on my box, analog TV and digital converter APEX
has a simple design, without buttons or switches, and requires very little in terms of adjustment / repositioning.
My current device is sitting on a pile of clean laundry on a couch next to my TV, and has required little movement or repositioning of receiving a great signal. During the day the unit is on top of a pile of clothes. Through the night (apparently the signal positions "reorient" itself or something), I move the unit1-ft. removed to sit on another pole. occasional corrections to improve the quality of the images have been few, and needs only the minimum turn the device left or right.
I back my $ 100 Best Buy-version, and again here at 2:01 for the price.
(Amazon bless you …)
More memory: For most, you may want to purchase an additional 60-20 ft coaxial cable,
easy to find the perfect location for signal reception.
Also:Do not forget the box unit tests without the use of repeater or amplifier.
Finally: Do not forget to check the unit either horizontally or vertically.
Good luck.
Terk FDTV1A Flat Digital Omni Directional Amplified Indoor Antenna (Black) Feature
- Optimized for HDTV reception and designed to blend in with high end components
- 360 degree reception pattern eliminates constant adjustment
- Removable ELN amplifier for outstanding reception without saturating the signal
- Patented reception technology outperforms traditional antennas
- Comes with easy 3 way mounting bracket
Terk FDTV1A Flat Digital Omni Directional Amplified Indoor Antenna (Black) Overview
TERK digital flat indoor antenna has a patented reception technology that outperforms traditional antennas. 360 degree reception pattern eliminates the need for constant adjustments. The removeable Extremely Low Noise (ELN) amplifier provides maximum flexibility and performance and gives you outstanding digital TV reception without saturating the signal. its high-gain design picks up further stations. This antenna is optimized for HDTV reception and has a flat profile designed to blend in with today’s high-end HDTV systems. Comes with a 3 way mounting bracket so it can hang, stand up, or lay flat. Has 1 year limited warranty.
*** Product Information and Prices Stored: Jun 04, 2010 22:12:58
Cheap Rgb Hdmi
